Parabolic dish solar energy concentrator with aperture diameter 1.4 m and focal length 0.32 m is designed and fabricated to charge and store solar thermal energy in phase change material (PCM) based heat packs. Overall heat loss factor, heat duty, over all thermal efficiency, and optical efficiency factor are calculated using water sensible heating and cooling tests and values are 16.11 W m-2 K-1, 546.9 W, 49.2% and 0.62 respectively. The performance characteristic curve is generated using these parameters to understand its performance at different ambient temperatures and solar insolation. The fabricated concentrator has been used to charge 16 PCM heat packs with 150 g PCM in each heat pack, which took about 35 minutes for complete charging of PCM heat packs at average ambient temperature 39 °C and solar radiation flux density 715 W m-2 K-1. The charged heat packs are subjected to discharge studies at average ambient temperature about - 7 °C and observed heat release in the temperature range of 48 to 40 °C for 50 minutes, suggesting its applications for comfort and therapeutic applications in high altitude areas. © 2016 Author(s).